# pyright: reportUnusedCallResult=false, reportWildcardImportFromLibrary=false
from build123d import *

center_thickness = 10

mop_diameter = 40
mop_arc_size = 180

scraper_diameter = 40
scraper_arc_size = 180

arms_thickness = 5

clamp_length = 50

with BuildPart() as mop_scraper_holder:
    with BuildSketch() as profile:
        with BuildLine() as connecting_outline:
            arc_s = 170
            mop_arc = CenterArc((0, (mop_diameter + center_thickness) / -2), mop_diameter / 2, 90 - (arc_s / 2), arc_s)
            scraper_arc = CenterArc((0, (scraper_diameter + center_thickness) / 2), scraper_diameter / 2, (arc_s / 2) - 90, -arc_s)

            Line(mop_arc @ 0, scraper_arc @ 0)
            Line(mop_arc @ 1, scraper_arc @ 1)

            screw_pos = scraper_arc @ 0.5

        make_face()

        mop_arm = CenterArc((0, (mop_diameter + center_thickness) / -2), mop_diameter / 2, 90 - (mop_arc_size / 2), mop_arc_size)
        offset(mop_arm, amount=arms_thickness, side=Side.RIGHT)
        make_face()

        scraper_arm = CenterArc((0, (scraper_diameter + center_thickness) / 2), scraper_diameter / 2, (scraper_arc_size / 2) - 90, -scraper_arc_size)
        offset(scraper_arm, amount=arms_thickness, side=Side.LEFT)
        make_face()

    extrude(profile.sketch, clamp_length / 2)
    extrude(profile.sketch, -clamp_length / 2)

    fillet(mop_scraper_holder.edges().filter_by(Axis.Z), 2)

    with Locations(Plane((screw_pos.X, screw_pos.Y, 0)).rotated((-90, 0, 0))):
        CounterBoreHole(3 / 2, 5.6 / 2, 3.2)

assert mop_scraper_holder.part is not None
export_step(mop_scraper_holder.part, "mop_scraper_holder.step")