# pyright: reportUnusedCallResult=false, reportWildcardImportFromLibrary=false
from build123d import *

def build_mop_scraper_holder(center_thickness: float):
    mop_diameter = 23.4
    mop_arc_size = 240

    scraper_diameter = 20.3
    scraper_arc_size = mop_arc_size

    arms_thickness = 3

    clamp_length = 30

    with BuildPart() as mop_scraper_holder:
        with BuildSketch() as profile:
            with BuildLine():
                arc_s = 170
                mop_arc = CenterArc((0, (mop_diameter + center_thickness) / -2), mop_diameter / 2, 90 - (arc_s / 2), arc_s)
                scraper_arc = CenterArc((0, (scraper_diameter + center_thickness) / 2), scraper_diameter / 2, (arc_s / 2) - 90, -arc_s)

                Line(mop_arc @ 0, scraper_arc @ 0)
                Line(mop_arc @ 1, scraper_arc @ 1)

                screw_pos = scraper_arc @ 0.5

            make_face()

            mop_arm = CenterArc((0, (mop_diameter + center_thickness) / -2), mop_diameter / 2, 90 - (mop_arc_size / 2), mop_arc_size)
            offset(mop_arm, amount=arms_thickness, side=Side.RIGHT)
            make_face()

            scraper_arm = CenterArc((0, (scraper_diameter + center_thickness) / 2), scraper_diameter / 2, (scraper_arc_size / 2) - 90, -scraper_arc_size)
            offset(scraper_arm, amount=arms_thickness, side=Side.LEFT)
            make_face()

        extrude(profile.sketch, clamp_length / 2)
        extrude(profile.sketch, -clamp_length / 2)

        fillet(mop_scraper_holder.edges().filter_by(Axis.Z), (arms_thickness - 0.01) / 2)

        with Locations(Plane((screw_pos.X, screw_pos.Y, 0)).rotated((-90, 0, 0))):
            CounterBoreHole(3 / 2, 5.6 / 2, 3.2)

    return mop_scraper_holder

mop_scraper_holder_top = build_mop_scraper_holder(15)
assert mop_scraper_holder_top.part is not None
export_step(mop_scraper_holder_top.part, "mop_scraper_holder_top.step")

mop_scraper_holder_bottom = build_mop_scraper_holder(10)
assert mop_scraper_holder_bottom.part is not None
export_step(mop_scraper_holder_bottom.part, "mop_scraper_holder_bottom.step")