# pyright: reportUnusedCallResult=false, reportWildcardImportFromLibrary=false
from build123d import *

bearing_offset = 20
bearing_diameter = 22
bearing_through_hole_diameter = 15
bearing_height = 8

core_width = 40
thickness = 20

screw_blocks_width = thickness
screw_blocks_height = bearing_offset
screw_blocks_radius = 3

screw_head_diameter = 8.5
screw_head_depth = 5
screw_body_diameter = 5

track_width = 6.2
track_height = 1.8

assert (bearing_offset - bearing_diameter / 2) > 0
assert (core_width - bearing_diameter) > 0
assert (screw_blocks_width - (screw_blocks_radius * 2)) >= 0
assert (bearing_offset - screw_blocks_height) >= 0


with BuildPart() as builder:
    with BuildSketch() as sketch:
        with BuildLine() as profile:
            l1 = Line(
                (0,0),
                ((core_width / 2) + screw_blocks_width, 0)
            )

            polyline_path = (
                l1 @ 1,
                ((l1 @ 1).X, screw_blocks_height),
                (core_width / 2, screw_blocks_height),
            )
            match (float)(bearing_offset - screw_blocks_height):
                case 0:
                    FilletPolyline(
                        *polyline_path,
                        radius=screw_blocks_radius
                    )
                case len if len > 0 and len < screw_blocks_radius:
                    sbl = FilletPolyline(
                        *polyline_path,
                        radius=screw_blocks_radius
                    )
                    Line(
                        sbl @ 1,
                        ((sbl @ 1).X, bearing_offset)
                    )
                case len if len >= screw_blocks_radius:
                    FilletPolyline(
                        *polyline_path,
                        (core_width / 2, bearing_offset),
                        radius=screw_blocks_radius
                    )
                case _: assert False

            CenterArc((0, bearing_offset), core_width / 2, 90, -90)
            mirror(profile.line, Plane.YZ)
        make_face()

        with Locations((0, bearing_offset)):
            Circle(bearing_through_hole_diameter / 2, mode=Mode.SUBTRACT)

    extrude(amount=thickness / 2)
    mirror(about=Plane.XY)

    with Locations((0, bearing_offset, builder.faces().sort_by(Axis.Z)[-1].center().Z)):
        Hole(bearing_diameter / 2, bearing_height)

    Box(core_width + (screw_blocks_width * 2), track_width, track_height, (90, 0, 0), (Align.CENTER, Align.CENTER, Align.MIN))

    with Locations(builder.faces().filter_by(Plane.XZ).sort_by(Axis.Y)[-2:]):
        CounterBoreHole(screw_body_diameter / 2, screw_head_diameter / 2, screw_head_depth)

assert builder.part is not None
export_step(builder.part, "drive shaft mount.step")